Free Delivery available
CALL 01732 795710 
Bulk Discounts  Available, Please Call

Brick-to-Block Construction

Sort By
Showing products 1 to 12 of 12
Staifix RT2 General Purpose Wall Tie

The Staifix RT2 is suitable for cavities from 50mm to 150mm and can be used in the construction of domestic houses and small commercial buildings up to 15 metres in height. Altitude and wind speed restrictions may apply.

From: £85.68
£102.82 (inc. VAT)
Lengths
200mm for 50-75mm cavities
225mm for 76-100mm cavities
250mm for 101-125mm cavities
275mm for 126-150mm cavities
Ancon Staifix HRT4 Housing Wall Tie (Type 4/Type A)

The Staifix HRT4 is suitable for cavities from 50mm to 150mm and can be used in the construction of domestic houses up to 10 metres in height. Altitude and wind speed restrictions may apply.

From: £28.71
£34.45 (inc. VAT)
Lengths
200mm for 50-75mm cavities
225mm for 76-100mm cavities
250mm for 101-125mm cavities
275mm for 126-150mm cavities
Ancon RD3 Offset Drip Wall Ties

Type 3 tie suitable for external walls of houses and small commercial buildings up to 15 m in height, built on flat sites, where the basic wind speed is up to 27 m/s and altitude is not more than 150 m above sea level.

From: £0.39
£0.47 (inc. VAT)
Length
250mm
275mm
Ancon ST1 Wall Tie

The Ancon ST1 is suitable for cavities from 50mm to 225mm and can be used for all types of building of any height, anywhere in the British Isles. The section that spans the cavity has a series of holes to provide water drips. This allows the same tie to be used in insulated cavities as well as open cavities.

From: £0.77
£0.92 (inc. VAT)
Lengths
200mm for 50-75mm cavities
225mm for 76-100mm cavities
250mm for 101-125mm cavities
275mm for 126-150mm cavities
300mm for 150-175mm cavities
325mm for 176-200mm cavities
350mm for 201-225mm cavities
Ancon Teplo Tie Basalt Fibre Wall Ties (Type 2)

PLEASE BE ADVISED THAT THIS PRODUCT IS BEING WITHDRAWN FROM SALE AND REPLACED WITH THE BF2 WALL TIE. Please get in touch for more info

From: £4.41
£5.29 (inc. VAT)
Size
275mm
300mm
325mm
350mm
375mm
400mm
425mm
Ancon Teplo-BF1 Wall Tie Type 1 Tie to PD 6697 (Masonry Heavy Duty)

The Ancon Teplo-BF is a composite wall tie manufactured fromÊpultruded basalt fibres. It has a thermal conductivity of 0.7W/mK.

From: £6.13
£7.36 (inc. VAT)
Size
200mm
225mm
250mm
275mm
Ancon Teplo-BF2 Wall Tie Type 2 Tie to PD 6697 (Masonry General Purpose)

The Ancon Teplo-BF is a composite wall tie manufactured fromÊpultruded basalt fibres. It has a thermal conductivity of 0.7W/mK.

From: £4.58
£5.50 (inc. VAT)
Size
200mm
225mm
250mm
275mm
300mm
325mm
350mm
375mm
400mm
425mm
Ancon Teplo-BF3 Wall Tie Type 3 Tie to PD 6697 (Masonry Basic)

The Ancon Teplo-BF is a composite wall tie manufactured fromÊpultruded basalt fibres. It has a thermal conductivity of 0.7W/mK.

From: £10.16
£12.19 (inc. VAT)
Size
450mm
475mm
500mm
525mm
Ancon Teplo-BF4 Wall Tie Type 4 Tie to PD 6697 (Masonry Light Duty)

The Ancon Teplo-BF is a composite wall tie manufactured fromÊpultruded basalt fibres. It has a thermal conductivity of 0.7W/mK.

From: £2.94
£3.53 (inc. VAT)
Size
200mm
225mm
250mm
550mm
575mm
Ancon Teplo-BFR

The Teplo-BFR is a low thermal conductivity wall tie manufactured from basalt-fibres that features a plain end for resin anchoring into an existing structure and a moulded safety end for building into a new bed joint.

From: £4.62
£5.54 (inc. VAT)
Size
210mm
235mm
260mm
285mm
310mm
335mm
360mm
385mm
410mm
435mm
460mm
485mm
510mm
535mm
560mm
585mm
Insulation Retaining Disc/Buttons (Bag 250)

The insulation retaining clip can beÊused on the full range of wall ties.

£16.79
£20.15 (inc. VAT)
Teplo-Clip Bag 250nr

Suitable for use with the TeploTie range.

£26.12
£31.34 (inc. VAT)