Free Delivery available
CALL 01732 795710 
Bulk Discounts  Available, Please Call

Cavities over 150mm

Sort By
Showing products 1 to 6 of 6
Ancon ST1 Wall Tie

The Ancon ST1 is suitable for cavities from 50mm to 225mm and can be used for all types of building of any height, anywhere in the British Isles. The section that spans the cavity has a series of holes to provide water drips. This allows the same tie to be used in insulated cavities as well as open cavities.

From: £0.77
£0.92 (inc. VAT)
Lengths
200mm for 50-75mm cavities
225mm for 76-100mm cavities
250mm for 101-125mm cavities
275mm for 126-150mm cavities
300mm for 150-175mm cavities
325mm for 176-200mm cavities
350mm for 201-225mm cavities
Ancon Teplo Tie Basalt Fibre Wall Ties (Type 2)

PLEASE BE ADVISED THAT THIS PRODUCT IS BEING WITHDRAWN FROM SALE AND REPLACED WITH THE BF2 WALL TIE. Please get in touch for more info

From: £4.41
£5.29 (inc. VAT)
Size
275mm
300mm
325mm
350mm
375mm
400mm
425mm
Ancon Teplo-BF2 Wall Tie Type 2 Tie to PD 6697 (Masonry General Purpose)

The Ancon Teplo-BF is a composite wall tie manufactured fromÊpultruded basalt fibres. It has a thermal conductivity of 0.7W/mK.

From: £4.58
£5.50 (inc. VAT)
Size
200mm
225mm
250mm
275mm
300mm
325mm
350mm
375mm
400mm
425mm
Ancon Teplo-BF3 Wall Tie Type 3 Tie to PD 6697 (Masonry Basic)

The Ancon Teplo-BF is a composite wall tie manufactured fromÊpultruded basalt fibres. It has a thermal conductivity of 0.7W/mK.

From: £10.16
£12.19 (inc. VAT)
Size
450mm
475mm
500mm
525mm
Ancon Teplo-BFR

The Teplo-BFR is a low thermal conductivity wall tie manufactured from basalt-fibres that features a plain end for resin anchoring into an existing structure and a moulded safety end for building into a new bed joint.

From: £4.62
£5.54 (inc. VAT)
Size
210mm
235mm
260mm
285mm
310mm
335mm
360mm
385mm
410mm
435mm
460mm
485mm
510mm
535mm
560mm
585mm
Ancon Two-Part Tie

Cavities exceeding 150mm require ties in a length that can be difficult to balance and keep horizontal during installation. An Ancon Two-Part Tie has one section that is built into the inner leaf and a second, interlocking section that is fixed as the outer leaf is constructed. An embedment of 75mm is required at each end.

£0.00
£0.00 (inc. VAT)
Cavities exceeding 150mm require ties in a length that can be difficult to balance and keep horizontal during installation